Bostitch UK

The BOS-PAL H can produce stringers and boards as well as assemble pallets from pre-made components, as the bridge can be equipped with two different sets of tools. This enables different types of nailing to be carried out at the same time, offering excellent flexibility.

Wood is placed on the flat assembly table and the bridge completes the nailing in one movement.

Suitable for one or more operators according to how quickly the job needs to be completed, the BOS-PAL H is designed for low to medium production runs.

The BOS-PAL (E) H version is a cost-effective machine built to a standardised specification.

The BOS-PAL V can produce stringers and  boards as well as assemble pallets from pre-made components, as the bridge can be equipped with two different sets of tools.

Wood is placed on the easy-access angled 60° assembly table and the bridge completes the nailing in one movement.

The BOS-PAL (E) V version is a cost-effective machine built to a standardised specification.

The BOS-PAL C assembles pre-fabricated stringers and decks to make full pallets, and has a chain system that moves the wood from the operator, through the fixed,   pre-programmed nailing bridge and onto a roller board for removal.

This allows a continuous production cycle as the operator can load whilst nailing and unloading is taking place at the other end of the assembly table.

The operator can also remain in the same position, making loading easier and faster.

With up to three sets of tools placed above and below the moving bridge, the
BOS-PAL TU H is able to nail a complete pallet in one pass of the flat assembly table.

Wood is placed on the table and the bridge completes the nailing in one movement.

Different sizes of pallets can be nailed at the same time thanks to the pre-programmed nailing options that are available with this machine.

This machine combines the flexibility of being able to produce stringers, boards or whole pallets with a continuous production method for fast, efficient nailing.

Equipped with two sliding assembly tables, the operator loads one table whilst the other is being nailed, providing a consistent nailing process through a static bridge that can hold two different sets of tools.

Each table is positioned according to the pre-programmed nailing pattern and the operator can stand in the same position, making loading easier and faster. A stacker can also be added for more efficient removal of the completed product to further increase production efficiency, whilst the jig can be quickly changed to accommodate different sizes.