Bostitch UK

The BOS-PAL B is fitted with two workstations working simultaneously for continuous high speed production with only a single operator.

Once stringers are loaded, the top boards of the first pallet are nailed followed by the bottom boards of the second pallet which is then turned over whilst the operator loads the next set of stringers. Completed pallets then move along the conveyor for manual or automated removal.

Optional units can also be added if required and 1 or 2 magazines for the boards can be specified to increase capacity.

The BOS-PAL B is also compatible with the BOS-SKI, offering even more automation possibilities

The BOS-PAL C assembles pre-fabricated stringers and decks to make full pallets, and has a chain system that moves the wood from the operator, through the fixed,   pre-programmed nailing bridge and onto a roller board for removal.

This allows a continuous production cycle as the operator can load whilst nailing and unloading is taking place at the other end of the assembly table.

The operator can also remain in the same position, making loading easier and faster.

With up to three sets of tools placed above and below the moving bridge, the
BOS-PAL TU H is able to nail a complete pallet in one pass of the flat assembly table.

Wood is placed on the table and the bridge completes the nailing in one movement.

Different sizes of pallets can be nailed at the same time thanks to the pre-programmed nailing options that are available with this machine.

The BOS-PAL TU W can also nail a complete pallet, but also comes with the added feature of sliding assembly tables for continuous production from a single operator position.

With up to three sets of tools placed above and below the moving bridge, the BOS-PAL TU W can nail a complete pallet in one pass of the horizontal assembly table. Equipped with two sliding assembly tables, the operator loads one table whilst the other is being nailed, providing a consistent nailing process through a static bridge that can hold three different sets of tools.

Each table is positioned according to the
pre-programmed nailing pattern and the operator can stand in the same position, making loading easier and faster. A number of optional components can also be added to the machine for even greater efficiency.